Quote:
Originally Posted by SPDKING
The only thing I can think of is maybe putting a jack underneath those OEM buckets to slowly release the pressure. Then it should easily come out?
|
Jack the rear of the Z up. Use jackstands. Remove the rear tires. Makes it easier to get at the bolt and nut on the knuckle. Put jack under where the spring is and apply some pressure. Remove nut and bolt from knuckle. Slowly release pressure from jack and allow mid link to lower. It only has to come down a few inches to release all spring tension. Paid attention to how the spring is seated in the top and bottom mounts. There is a relief in the rubber cushion that the end of the springs sit in. And the spring is out.