View Single Post
Old 05-23-2019, 01:33 PM   #2638 (permalink)
TopgunZ
A True Z Fanatic
 
TopgunZ's Avatar
 
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834
TopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond repute
Default

When I set these the end of the threads line up with the top of the bolts and we don't get slip. Yours looks way way too tight. Your going to chew up your bearings.



Quote:
Originally Posted by G3RSTY7 View Post
I just ordered a Gates belt tension gauge to try to avoid guessing on the belt tension as right now I'm hearing some gear chatter when shifting gears while everything hasn't been completely warmed up probably first 20 minutes or so of driving (probably belt was too tight) but I do see some signs of belt slip after I loosened it so I ordered a gauge. Gates says belt tension should be between 120-160 when cold, and if tension drops below 120 after the car/belts warm up for 5 minutes, then it needs to be tightened. Sound right?

I attached a picture below to clarify, but when I adjust the belt tension do I just get below the car and turn the long hex bolt CCW to loosen and CW to tighten, or do I need to loosen the bolt behind the tensioner pulley, then adjust the long hex bolt, and re-tighten tensioner pulley bolt? I understand there is usually some sort of spring mechanism in the tensioner to help it do it's job so I want to get it right.

Also while I'm in the business of checking belt tension, anybody know what tension the serpentine belt is supposed to be? I thought the stock tensioner was supposed to take care of that but I've read some things that make me want to double check it since OEM isn't designed to also run a supercharger.

I have the green no-slip belt and pulley if tensions make a difference from the OEM belt FWIW.

Thanks
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM
TopgunZ is offline   Reply With Quote