Nissan 370Z Forum - View Single Post

OptionZero · 05-20-2019, 01:15 AM

245/35/20 (26.8 inches tall)
285/30/20 (26.7 inches tall)

A moderate stretch that should give you plenty of clearance
You can certainly go wider but thats gonna require correspondingly more camber

In any case, you'll need to get the SPL FUCA and roll your fenders. Depending on your height, you may need to trim the front bumper tab.

Your fronts are more aggressive than your rears. The rears should fit easily. You can run 20x11 +0 with around -2 of camber on a 285/30/20

I do not know if that specific wheel clears akebonos, it depends on the spoke design of each specific wheel in a particular size

I know everybody bitches about the $700 for the SPL FUCA but it solves all problems and its an extremely high quality part. Save up and get them before you get wheels

05-20-2019, 01:15 AM	#2827 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,223 Drives: 15 370Z Nismo 6MT Rep Power: 214100	245/35/20 (26.8 inches tall) 285/30/20 (26.7 inches tall) A moderate stretch that should give you plenty of clearance You can certainly go wider but thats gonna require correspondingly more camber In any case, you'll need to get the SPL FUCA and roll your fenders. Depending on your height, you may need to trim the front bumper tab. Your fronts are more aggressive than your rears. The rears should fit easily. You can run 20x11 +0 with around -2 of camber on a 285/30/20 I do not know if that specific wheel clears akebonos, it depends on the spoke design of each specific wheel in a particular size I know everybody bitches about the $700 for the SPL FUCA but it solves all problems and its an extremely high quality part. Save up and get them before you get wheels __________________ OptionZero Build Thread Last edited by OptionZero; 05-20-2019 at 01:18 AM.