Quote:
Originally Posted by wrxrcr
I just installed a wavetrac lsd in mine, I was a victim of overcooking the vlsd too many times. I have my ride height set at 26.75" floor to fender arch. Running square 285s re71s on 19x10.5 konigs, I had to roll front fenders for clearance/rubbing issues and I run a 15mm spacer in the rear.
What camber to you guys recommend, currently at about 3.3 degrees front and 2 degrees rear?
|
You need to get a pyrometer and measure the temperature across the tread as the correct amount of camber will depend on numerous factors. If you continuously see higher temperature on the outside of the tire, you probably need more camber. I would start at -3.0 and go from there.
Using a pyrometer - 949 Racing