Adding this in case anyone comes across it moving forward so there are some baseline settings.
Keep in mind I primarily autocross my car so my setup is based around that. On the 18's it's pretty low.. I might have to bump it up some if I'm consistently scraping at events. I've ran similar alignments settings so I tried to get those close to what I had previously before installing the coilovers.
Measurements taken @ 33.3Psi, 285/30/18 (RE71) SQ'd.
Alignment
Front
Camber: -4.0
Caster: 8.7
Toe: 0.0
Rear
Camber: -2.7
Toe: 0.15
Heights (measured from wheel center to fender)
FL: 13.25"
FR: 13.25"
RL: 13.5"
RR: 13.5"
Note: My driver's side was substantially lower in my baseline measurement vs the right side, especially in the rear, before I installed the coilovers. I have several extra turns on the adjuster on that side to level it out.
__________________
Intake | HFC's | CBE | Nismo 1.5 | Suspension Stuff | CMAK | Ecutek | 321 WHP
|