Nissan 370Z Forum - View Single Post

Rev_Night · 05-14-2019, 03:19 PM

I shared this in another P1239 thread, but I figured I would share this here since this is apparently the main and well-linked thread

I have a 2007 HR 350z now at about 60K mileage. Three years ago (Summer 2016), I had a local shop install the a Stillen/Vortech supercharger. I have some non-HP supporting mods in the engine, hi-flow cats, and a motordyne exhaust. I wanted a conservative tune since this my daily driver and only car, I have about 400 rwhp and 315 tq. Performance wise I'm very happy with it, and I don't abuse the car. Fun highway driving only.

However, I have had multiple problems with the kit.

Problem 1: Bad Throttle cables
A few months after I bought it, Stillen came out with upgraded Throttle Body Extension cables but deigned not to mass inform their customers. These cables were improved to have a much thicker gauge since the original ones were crimping. Crimping may, and in my case did, cause the engine to not turn on, or go into 'limp mode'. We had to buy the new upgraded cables for $140 and install them. Still, this required a tow and a few days down time. All sets bought post winter 2016 will have these new cables

Problem 2: Heat/EMI problems
Maybe about 6-12 months after that, it happened again. Was driving just fine, the next morning for work, car turns on, then heavily lurches, dashboard is now a xmas tree. I get it towed to same shop, the check engine light is a P1239 code. This is a very famous code for this error, its all over google and Z forums. After conducting forum research, the 'new' cables Stillen provided still are susceptible to heat and electrical interference, so a heat/EMI sleeve was placed over the cables.

Problem 3: Now ******* what?
This morning (May 14 2019), the car went into limp mode again. Jesus ****ing christ what now? After several attempted restarts all fail, I call a tow. An hour later, the second the tow gets here, I start up car just fine and it seems perfect, like nothing is wrong albeit with check engine light. It's in the shop now, they are looking at it.

So overall, I'm kinda not that happy with Stillen. The performance is great, but this is my only car, so I care more about reliability. Something is seriously wrong with their electrical division, but its the same problem now 3 ****ing times over the past few years.

05-14-2019, 03:19 PM	#62 (permalink)
Rev_Night Base Member Join Date: Nov 2013 Location: DC Posts: 28 Drives: 2007 350z Rep Power: 12	I shared this in another P1239 thread, but I figured I would share this here since this is apparently the main and well-linked thread I have a 2007 HR 350z now at about 60K mileage. Three years ago (Summer 2016), I had a local shop install the a Stillen/Vortech supercharger. I have some non-HP supporting mods in the engine, hi-flow cats, and a motordyne exhaust. I wanted a conservative tune since this my daily driver and only car, I have about 400 rwhp and 315 tq. Performance wise I'm very happy with it, and I don't abuse the car. Fun highway driving only. However, I have had multiple problems with the kit. Problem 1: Bad Throttle cables A few months after I bought it, Stillen came out with upgraded Throttle Body Extension cables but deigned not to mass inform their customers. These cables were improved to have a much thicker gauge since the original ones were crimping. Crimping may, and in my case did, cause the engine to not turn on, or go into 'limp mode'. We had to buy the new upgraded cables for $140 and install them. Still, this required a tow and a few days down time. All sets bought post winter 2016 will have these new cables Problem 2: Heat/EMI problems Maybe about 6-12 months after that, it happened again. Was driving just fine, the next morning for work, car turns on, then heavily lurches, dashboard is now a xmas tree. I get it towed to same shop, the check engine light is a P1239 code. This is a very famous code for this error, its all over google and Z forums. After conducting forum research, the 'new' cables Stillen provided still are susceptible to heat and electrical interference, so a heat/EMI sleeve was placed over the cables. Problem 3: Now ***** what? This morning (May 14 2019), the car went into limp mode again. Jesus ing christ what now? After several attempted restarts all fail, I call a tow. An hour later, the second the tow gets here, I start up car just fine and it seems perfect, like nothing is wrong albeit with check engine light. It's in the shop now, they are looking at it. So overall, I'm kinda not that happy with Stillen. The performance is great, but this is my only car, so I care more about reliability. Something is seriously wrong with their electrical division, but its the same problem now 3 **ing times over the past few years.