Quote:
Originally Posted by scope22
It was a while ago that i did this but all i had to do was add a pin to the connector, no splicing into harness
|
From the current Navi Delete thread I posted that involved swapping the CAN AC Amp and running new wire:
Quote:
5. You will need to wire:
Pin 5 of M67 to pin 6 of M66 (pin you added)
Pin 4 of M67 to pin 7 of M66 (pin you added)
Pin 1 of M67 to pin 20 of M66 (splice into wire)
Pin 6 of M67 to pin 19 of M66 (splice into wire)
6. Next you will need to wire for illumination:
Pin 2 of M67 to pin 3 of M256 (splice into wire)
Pin 3 of M67 to pin 4 of M256 (splice into wire)
|
These are things I wanted to avoid in addition to running new wire to the ECU and fuse block. A big part was also wanting to provide a way to integrate status/control into custom apps.