Originally Posted by Rusty

Worked on the Z some more. Have the left side brake duct hose done. Working with the 3" hose is a bitch. Had to oval a section of the hose to clear the front inside of the tire so that the tire doesn't rub. Modded the stock backing plate to use with the ducts. The Stillen backing plates are thicker and don't flex. The stock plates flex when turning the steering wheel all the way to the left. The hose pushes the plate into the rotor. Had to give the plate more clearance by grinding.

The right side should be real fun because of the washer reservoir being in the way.