Nissan 370Z Forum - View Single Post - Looking for a pretty aggressive offset... Let me know if this will work.

OptionZero · 04-20-2019, 01:50 PM

That's not that aggressive
I'm running 20x11 +15 in front w/ 275/30/20. This required -3 camber and pulled front fender
And
20x12 +20 in back w/ 325/25/20. Rear has more clearance to go even with that spec

Your rears are fine

You can go more aggressive in front if you want

Caveat:
You MUST get SPL parts adjustable arms to dial in camber and other alignment
Roll fenders and relocate mounting tab

After that you can go much more aggressive

Example:
Work Meister S1 3P 19x10-2 and 19x11-7

CarbonFZ ran 19x10-2 and 19x11-7. He was static and had to run aggressive stretch, but it was done

On bags u have an advantage as well

04-20-2019, 01:50 PM	#2 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,225 Drives: 15 370Z Nismo 6MT Rep Power: 214100	That's not that aggressive I'm running 20x11 +15 in front w/ 275/30/20. This required -3 camber and pulled front fender And 20x12 +20 in back w/ 325/25/20. Rear has more clearance to go even with that spec Your rears are fine You can go more aggressive in front if you want Caveat: You MUST get SPL parts adjustable arms to dial in camber and other alignment Roll fenders and relocate mounting tab After that you can go much more aggressive Example: Work Meister S1 3P 19x10-2 and 19x11-7 CarbonFZ ran 19x10-2 and 19x11-7. He was static and had to run aggressive stretch, but it was done On bags u have an advantage as well __________________ OptionZero Build Thread Last edited by OptionZero; 04-20-2019 at 01:53 PM.