Quote:
Originally Posted by bunk
Im kinda slow when I work on cars so itll be more like a week. Appreciate your offer. I'll probably take you up on it!  |
You'll need a 2" holesaw for cutting the center of the bushing out. Get this one. It will cut all the way though.
https://www.homedepot.com/p/Diablo-2...00CT/301697691
You will also need a muffler tool to remove the outer shell of the oem bushing. Get one of these. A inside muffler pipe cutter. It's the one used for cutting the inside pipe.
Plus a 2". 60 grit flapper wheel to clean up the inside of the bore in sub-frame. You don't want any sharp edges or burrs in the bore. You want it smooooth.
https://www.homedepot.com/p/Lincoln-...E&gclsrc=aw.ds