Nissan 370Z Forum - View Single Post

TopgunZ · 03-11-2019, 01:49 PM

Your steel braided line is for the supercharger drain, which you will place on the supercharger where the drain plug is currently at.

There is not a pulley missing as you re-use a pulley that you take off of the car when doing the install. This is called out in the instructions.

You do not need any other hoses as those are only for CARB and there is nowhere to route these. That is why there is 2 breather filters sent with the kit. One for each side of the valve covers.

The purge valve needs to go to the manifold. You can either T into one of the 2 on the back or get a barb like in the picture. Let me know if you want me to send you one if you need it.

03-11-2019, 01:49 PM	#322 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Your steel braided line is for the supercharger drain, which you will place on the supercharger where the drain plug is currently at. There is not a pulley missing as you re-use a pulley that you take off of the car when doing the install. This is called out in the instructions. You do not need any other hoses as those are only for CARB and there is nowhere to route these. That is why there is 2 breather filters sent with the kit. One for each side of the valve covers. The purge valve needs to go to the manifold. You can either T into one of the 2 on the back or get a barb like in the picture. Let me know if you want me to send you one if you need it. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM