Updated Tire & Wheel Fitment Question:
Any advice, knowledge, constructive feedback is welcome. Please and thankyou!
--------------------------------------------------------
Current -- || 370z || 2009 || Sport Package || Coup Model ||
275/35/19 Rear with Rims that fit
-- Transfer to new 275s and put those in the Front of the car
245/40/19 Front with Rims that fit
-- Cannot transfer these to 305s, I highly doubt the current rims on these tires will fit 305s. Even if it was 9.5" I would not want to put those on the 305s.
--------------------------------------------------------------------------
Have:
- 305/30/19 Rear [Need 10.5" Rims] -- Purchase new 10.5" rims [TSW Nurburgrings] -- With stock offset of +41
- 275/35/19 Front [Need 9.5"+ Rims] -- Transfer from current Rear rims and swap these tires to the front.
--------------------------------------------------------------------------
Spacers:
- 15mm spacers for front (Will be on 275s)
- 20mm spacers for rear (will be on 305s)
~*~ I can remove these spacers if necessary, assuming they make my car rub...I will remove them otherwise I won't ~*~
--------------------------------------------------------------------------
Coilovers:
- KW V3 [Car is lowered so I don't know how much this will affect this new tire setup I'm looking at? Rub? No Rub? Should I adjust it back to stock height?
--------------------------------------------------------------------------
Any advice, knowledge, constructive feedback is welcome. Please and thankyou!
UPDATE:
My car is actually previously forum user 'aznroadster' I found out when looking for wheel/tire specs.
I now possess his car lol.
However he was running different tires back then, and now I have different sized tires than he did (305/30 and 275/35) so I'm guessing either he, or someone else after him bought 275s and 245s and put them on the car in which I have now.
I have no idea if the rims are the exact same or if the owner(s) after him just bought the same exact rims as he did to fit the smaller tires?
Kind of confused. lol
__________________
|| ECUTEK (Eugene) || A2A || IPP Built Motor Stage IV Spec || RJM Short Block || Quaife LSD || KW V3 || Stillen-Exhaust || 11.0.1 CR || 928 Full Rebuild || CPZ 34 Row Oil Cooler ||
|