Thread: [WANTED] Stillen SC Bracket Bolts
View Single Post
Old 02-21-2019, 11:18 AM   #3 (permalink)
cupcakez
Track Member
 
Join Date: Oct 2017
Location: California
Posts: 635
Drives: 2009-7AT-Base-Coup
Rep Power: 4836
cupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond repute
Default

Thanks. I used this from the Stillen Manual to help find what I needed, but the pieces of information that this is missing is the pitch.

What pitch is needed for the M6 x 30mm? is it 1.0? 1.25? 1.5? Etc.
Also, it is missing the shoulder length needed to compensate for the width of the SC bracket.

Yes, they bolt right onto the timing cover, but you cannot use the OEM bolts that were originally used because if you did, and assuming that those OEM bolts were a perfect fit, then adding the width of the SC bracket will throw off the 'perfect fit' hence needing a default longer length shoulder to compensate for the width of the SC bracket -- if any of that makes sense.
__________________
|| ECUTEK (Eugene) || A2A || IPP Built Motor Stage IV Spec || RJM Short Block || Quaife LSD || KW V3 || Stillen-Exhaust || 11.0.1 CR || 928 Full Rebuild || CPZ 34 Row Oil Cooler ||
cupcakez is offline   Reply With Quote