Nissan 370Z Forum - View Single Post - Need Advice! New Clutch Kit, P0335 Crank Sensor Code.

shaks95 · 02-05-2019, 07:30 PM

I removed the Z1 flywheel and installed the stock dual mass flywheel, because Z1 hasn’t been replying to any emails and I needed the car on the road.

So after driving 100km (60miles) and keeping the engine revs below 3k rpm, the factory dual mass decided to break/damage, according to my mechanic he said that the 6 puck clutch had too much force for the factory flywheel and damaged it along with my starter motor

Sent from my iPhone using Tapatalk

02-05-2019, 07:30 PM	#5 (permalink)
shaks95 Base Member Join Date: Mar 2018 Location: Sydney, Australia Posts: 6 Drives: 2011 Nissan 370Z 6MT Rep Power: 7	I removed the Z1 flywheel and installed the stock dual mass flywheel, because Z1 hasn’t been replying to any emails and I needed the car on the road. So after driving 100km (60miles) and keeping the engine revs below 3k rpm, the factory dual mass decided to break/damage, according to my mechanic he said that the 6 puck clutch had too much force for the factory flywheel and damaged it along with my starter motor Sent from my iPhone using Tapatalk