This is the review that I'm posting again.
If you have exhaust like FI that are close to the diff. This brace won't fit unless you trim about 1 3/8" on the corner of the brace. The other problem is that the upper mounting hole does not line up with the hole in the sub-frame. It's off by a bolt hole diameter. They say to loosen the diff bolting up to the diff so that you can move the diff around and get the holes to line up. Problem is if you have a solid bushing like SPL. When tightening the diff bolting back down. This will put stress on the bolting that you don't need. If you have the stock rubber bushing. you might get away with it.
The other thing that I noticed. There is weld beads on both sides of the bends of the brace. It looks like when bending the metal to shape. The metal cracked at the bends. So they welded over the cracks to hide them.
Rusty