Nissan 370Z Forum - View Single Post

JARblue · 01-30-2019, 10:36 AM

Using Jack Stand...where to contact point?

If I have to use the pinch rails to lift, then I usually just put the front jacks stands on the frame (see blue boxes in the attached pic in the linked post above).

I drive my stock Z onto a 2x6 laid flat and can reach the front jack point with a little rubbing on the plastic chin spoiler. Lowered Z needs at least two stacked and sometime that won't do it depending on the setup. Yes, typical order for me is front partially, rear fully, then level the front.

01-30-2019, 10:36 AM	#7 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Using Jack Stand...where to contact point? If I have to use the pinch rails to lift, then I usually just put the front jacks stands on the frame (see blue boxes in the attached pic in the linked post above). I drive my stock Z onto a 2x6 laid flat and can reach the front jack point with a little rubbing on the plastic chin spoiler. Lowered Z needs at least two stacked and sometime that won't do it depending on the setup. Yes, typical order for me is front partially, rear fully, then level the front. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \| Last edited by JARblue; 01-30-2019 at 10:38 AM.