Quote:
Originally Posted by JARblue
|
Great question...……… This did not work for me. Tried it about a half a dozen times.
Flashing Airbag Light After HU Install
"
****IIMPORTANT****
Turn the ignition off as soon as the airbag light goes out the first time.
If you have the airbag light blinking here is how to reset it:
1. Push the start button two times (Ignition on but engine not started).
2. Watch the airbag light closely. It will stay on for a few secs. and then as soon as it blinks off (the start of the flashing), turn the key off INSTANTLY.
3. Count to 5 (1 Mississippi, 2 Mississippi . . . .)
4. Repeat steps 1-3 two more times until you have done the cycle three times.
5. Now turn the key on and watch the light. It will start blinking in a different, slower manner. This is diagnostic mode. You can watch this for a little while, no hurry.
6. Now turn the key off again, Count to 5 like in step 3 again, and turn back on. If the procedure worked, the airbag light will not be flashing.
If it does not work the first time, just repeat the steps again.
"
Back to Google I guess. If I can't find anything that works, off to the dealer to get ripped off for 3 minutes work.
Denny