Need Advice! New Clutch Kit, P0335 Crank Sensor Code.
Hello, this is my first time posting, so I apologise if I'm posting in the wrong section.
I have a 2011 370z 6MT, in Australia they only came with the NAV & sports package.
I recently had a 6 puck clutch and light weight flywheel kit from Z1motorsports, and also a Zspeed CMAK installed. After the installation the car drove fine for 15 minutes before it went into limp mode and refused to rev above 3500rpm, which then gave a P0335 code for the Crankshaft Position Sensor "A" Circuit.
So we went ahead & changed the sensor to a new OEM sensor from Nissan, but the problem was still not fixed, we also had someone to come and inspect the wires to make sure there was no short in the circuit but that was also fine. My mechanic says he's 100% positive that he installed the kit correctly. Everything else works fine, clutch engages and disengages fine, so I'm not sure what else I can do and I really don't want to put the OEM flywheel back in.
I've added some photos for you to look at in case it helps, thanks in advanced.
|