Hour job turned into 5 hours.
Removed the old pads and rotors on the PowerWagon. Took the rotors to get turned. That was over an hours. Rick just wanted to BS the whole time he was cutting my rotors.
Come home and get ready to install the rotors. Took my air hose and blew the junk out from the rotors and around the e-brake shoes. Ended up blowing the brake material off of the metal shoe.
The bonding that holds the material to the shoe had released.
Now have to go to NAPA and get new e-brakes.
Come home and start to put things back together. Left side first. E-brake shoes on. That was a bitch. Rotor on, new pads in place. Push the 2 pistons back in the caliper. Heard a pop on the right side.
Had pushed a piston out on the right side caliper.
Go to install the left caliper. Come to find out that the slides are sticking. So...I fixed them. Left side finished.
Start on the right side. Fixed the slides first. Install the e-brake shoes. Manage to push the popped out piston back in the caliper with no trouble.
Dodged a bullet on that. Finish this side.
Next time for rear brakes. I'll need new rotors, and all the hardware.