Nissan 370Z Forum - View Single Post

shadow85 · 12-24-2018, 08:04 AM

Ok so I did a few pulls other night by setting the SET to 45%. The highest I have tried so far, this seems to give me consistent movement with the boost now. Althought it only added approximately 0.5 PSI.

So now I am always hitting 8 PSI @ 45% SET, anything lower than 45% wil result in 7.5 PSI. At this point I was pretty tired from the pulls and did not increase the SET more to test further. I was happy to see it finally go above wastegaste boost pressure.

I will at a later date, increase the SET to 50% and test the boost pressure then.

12-24-2018, 08:04 AM	#23 (permalink)
shadow85 Track Member Join Date: Jul 2015 Location: South Australia, Austra Posts: 918 Drives: 15' 370Z A/T AMM TT Rep Power: 25	Ok so I did a few pulls other night by setting the SET to 45%. The highest I have tried so far, this seems to give me consistent movement with the boost now. Althought it only added approximately 0.5 PSI. So now I am always hitting 8 PSI @ 45% SET, anything lower than 45% wil result in 7.5 PSI. At this point I was pretty tired from the pulls and did not increase the SET more to test further. I was happy to see it finally go above wastegaste boost pressure. I will at a later date, increase the SET to 50% and test the boost pressure then.