Quote:
Originally Posted by hc_416
Hey guys,
Was back at it again. After i got the pump off i took the bottom plate off to see what happened. I see no shear pin? in one of the gears; and if im correct that is what attach's the gears to the pump!! is there anyway to just get the pump rebuilt? it seems if you replace the shear pin it should work. Any ideas or info?
https://imgur.com/a/mlcCwbi |
There are no shear pins, there is a key to hold the gear on to the shaft as it rotates. It is not possible for the key to come out with the cover on, and the gear in place. It is not a large key, so it just slides down the square hole on the right gear. You can pull that gear out to inspect it.
Those gears look mint.
Did you pull the gears out at all? If the motor is running there is absolutely no reason for a rebuild. I have never seen one of these fail.