Nissan 370Z Forum - View Single Post - [Build Thread] -- Journey to 700+ WHP [Supercharger]

cupcakez · 12-19-2018, 02:28 PM

Got a call back from Carl at 928motorsports regarding my blower.

He told me it is not repairable by them due to the impeller shims / washers missing. This caused the impeller to hit the casing and metal shards to be transferred.

He said the transmission part is still good to go (the housing) but the impeller may need rebalancing.

He also stated that it needs an oil slinger, unless whoever takes this will want to make it externally oil fed, then they do not need an oil slinger.

The bearings and the seals are still fine as well.

I told him to ship it back to me since the expensive ceramic bearings are still good. At least, I could sell those, if not the entire head unit as is to someone for a very cheap price.

I am willing to let it go for $200 - $300, the entire thing as is.

If still interested, let me know.

Thanks!

I will also be saving up for the next few months for the Paxton Novi 2200x Supercharger, built by ECS (East Coast Superchargers)

Since it is the same bolt pattern as our current bracket, I can fit it into our car.

I just need to find out a plausible solution for an air filter to fit.

/blower sold.

12-19-2018, 02:28 PM	#366 (permalink)
cupcakez Track Member Join Date: Oct 2017 Location: California Posts: 635 Drives: 2009-7AT-Base-Coup Rep Power: 4836	Got a call back from Carl at 928motorsports regarding my blower. He told me it is not repairable by them due to the impeller shims / washers missing. This caused the impeller to hit the casing and metal shards to be transferred. He said the transmission part is still good to go (the housing) but the impeller may need rebalancing. He also stated that it needs an oil slinger, unless whoever takes this will want to make it externally oil fed, then they do not need an oil slinger. The bearings and the seals are still fine as well. I told him to ship it back to me since the expensive ceramic bearings are still good. At least, I could sell those, if not the entire head unit as is to someone for a very cheap price. I am willing to let it go for $200 - $300, the entire thing as is. If still interested, let me know. Thanks! I will also be saving up for the next few months for the Paxton Novi 2200x Supercharger, built by ECS (East Coast Superchargers) Since it is the same bolt pattern as our current bracket, I can fit it into our car. I just need to find out a plausible solution for an air filter to fit. /blower sold. __________________ \|\| ECUTEK (Eugene) \|\| A2A \|\| IPP Built Motor Stage IV Spec \|\| RJM Short Block \|\| Quaife LSD \|\| KW V3 \|\| Stillen-Exhaust \|\| 11.0.1 CR \|\| 928 Full Rebuild \|\| CPZ 34 Row Oil Cooler \|\| Last edited by cupcakez; 12-19-2018 at 04:32 PM.