So, Dave and I made the printed battery hold down/spacer for the Odessey PC 680 battery and I ran it all year long.
Thread here:
3D printed battery tray for Odyssey PC680
These are available to purchase here:
https://www.etsy.com/shop/WalkersHotRodShop
Various colors and materials are available too!
Now that it is 32 degrees outside, racing is over, since the track is closed due to weather, the 370 has set for two weeks and now it wont start on the PC 680.
We had printed a spacer and hold down for the Optima Red Top and Yellow Top Batteries printed previously and laying on the bench. This one is Red PLA material at 20% fill.
So, now is the time to install it.....