View Single Post
Old 11-28-2018, 08:20 PM   #339 (permalink)
cupcakez
Track Member
 
Join Date: Oct 2017
Location: California
Posts: 635
Drives: 2009-7AT-Base-Coup
Rep Power: 4836
cupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond repute
Default

Quote:
Originally Posted by Optimiser View Post
I've never heard of Vortech recommending using the shipping plugs instead of the breather plug, instead the exact opposite. So I think what you say 928 says in "a soundclip" is BS!

"Once installed in the car you MUST install the vent or the case will over pressurize and blow the seals out".

"The solution for the spilling out the breather hole is to fill the unit with less than 4 ounces".

"After pressing Vortech tech help on the issue they tell me that for road racing in particular you need just 2.5 to 3 ounces to compensate for the oil expanding at temperature. More than that amount and it barfs it out".
I've only heard of one person's seals blowing out throughout all the people who seal both holes with shipping plugs with 928 upgrade.

Filling it up with 4 oz and then having it spill is pretty much the same thing IMO as filling it up with less than 4 oz it will stop when it stops.

You're right. They did recommend the exact opposite at one point.
Either 928 is lying out of their *** so they can make Vortech look bad, and that they can get more business from broke 928 blowers just for plugging both holes up, or they are telling the truth because they are finding out that tons of people are calling 928 and letting them know that plugging up both holes is actually working for them.

Not sure.

I guess we'll find out.

Either case, I'd rather blow out the seals than seize it up if I had to choose one or the other
__________________
|| ECUTEK (Eugene) || A2A || IPP Built Motor Stage IV Spec || RJM Short Block || Quaife LSD || KW V3 || Stillen-Exhaust || 11.0.1 CR || 928 Full Rebuild || CPZ 34 Row Oil Cooler ||
cupcakez is offline   Reply With Quote