Originally Posted by cupcakez

Okay.

So what I'm getting from this information is:
Total area the belt surrounds with your current setup of:
- 3.47 Jackshaft SC sided pulley
- 3.00 Direct SC Blower pulley
- 2.50 SC Idler pulley
---------------------------------------------
Total: 8.97" inches of area that the pulleys are using up from the belt and it seems to work fine.

Then you said if you changed the 3.0" down to a 2.85" Direct SC Blower pulley, to compensate for the loss in size, you have to change another pulley and that pulley of choice would be your idler size -- and to upgrade it in size at that which you said a 3.00" idler pulley would do it.

This would give you a total of 9.32" inches of area that the pulleys would use up as opposed to your previous setup of 8.97".

I assume the idler pulley could be adjusted to compensate for the difference of .35" of area between the two setups?