I have also:
1. Removed and re sealed the back glass.
2. Removed the rear hatch weight.
3. Removed all the plastic in the trunk and spare, foam, tools etc..
4. Removed the third brake light high mount assy completely.
5. Replaced the rear hatch seal.
6. Replaced the two spring bumpers with upgraded part #.
7. Re-set the rear latch position, to tighten up the hatch to body.
8. Removed all the wiring harnesses from the rear defrost and third high mount brake light from its mounting on the rear hatch.
The noise stopped when the defrost harness on the driver side of the hatch was removed and rolled up.
So at this point I am thinking drivers side rear defrost wiring harness.
|