Thread: Outer bleeder valve not bleeding
View Single Post
Old 09-19-2018, 01:36 AM   #2 (permalink)
REVRAY
Base Member
 
REVRAY's Avatar
 
Join Date: Feb 2017
Location: Chisago City, MN
Posts: 42
Drives: 2013 370Z Touring Sp
Rep Power: 8
REVRAY is on a distinguished road
Default
Quote:
Originally Posted by SOUTH-BRONX View Post
in the process of flushing out the brake system with new fluid, the right outer front caliper would not bleed through the valve. Pressure was over 15psi on the Motive Bleeder Kit and all other valves worked perfect. would like to hear thoughts on possible cause before investing to rebuild caliper. Remember the inner valve was perfect on this caliper but, the outer valve had no pressure. as if it was clogged.
Thanks for your comments
Odds are your bleeder is plugged. I had on my Acura TL. You can remove and take a wire tie and clean the bleeder hole, better off just purchasing new bleeder(s), they only cost a couple bucks.
REVRAY is offline   Reply With Quote