View Single Post
Old 08-31-2018, 06:32 PM   #1 (permalink)
braydo25
Base Member
 
Join Date: Apr 2012
Location: Tacoma
Posts: 67
Drives: Nismo z34
Rep Power: 13
braydo25 is on a distinguished road
Thumbs up 2013 Nismo 370z - Fully Built, Twin Turbo, 42k miles, Clean Title, 700whp On Pump

PRICE DROPPED TO 26k now.. (5/4/19)

Here's a walkaround video / cold start: https://www.youtube.com/watch?v=t0GY4rvqgFo

Up for sale is my 2013 Nissan 370z (Genuine NISMO edition). It's in fantastic shape and is a blast to drive (In all honesty it's too quick for me).

The car was remote tuned by Sebastian from Specialty Z in California (They've done many twin turbo 370z builds and are very well known for what they do) it's currently on 18psi for the high boost map on 92 octane. It has not seen a dyno since being tuned but is likely making around 680whp to 720whp with room for more if you opt in for a 100 octane tune. In my opinion the current power it's making is plenty. The tune is very clean, I occasionally do logging during pulls just to see if anything's changed - I run shell 92 octane all the time in this car and never see any ignition correction at all - which means no knock. Seb was very thorough with this tune.

The car itself is a genuine nismo, clean title - never any accidents, I am the 3rd owner and also the one who had all the engine work done. The odometer has 42,000 miles on it, the built motor has 3,000 miles on it and was properly broken in. Compression is good across the whole motor, always very quick to start, never any issues driving it.

The exterior is probably 8/10 shape, 2 of the wheels have slight curb rash, and the driver's door has a slight scratch in the clear that could be cut/buffed out. The front bumper has very light dings from regular driving and debris hitting the front bumper (common for z's).

Interior is in great shape, nothing really to note.

Anyways, I'm asking $26,000 FIRM - The car has had much more $ than that put into it all things accounted for, but I obviously don't expect to get out of it with what I've put in. If interested - text me at 253-548-7443, I work during the days so don't take calls until after 5~ but can quickly respond to texts. I don't check the370z too often so I may not quickly respond to PM's

It's time for me to move on in life and focus on family / business, which is really the only reason I'm looking to sell. The cash from the car will give me runway to focus on some ventures I've been wanting to do for a while now.

The car will come with a few extra goodies. Including an EcuTek cable for flashing tunes, new HKS air filters, etc.

Here's a list of what's been done off the top of my head, there's likely small pieces that I'm forgetting.

Engine Work
- Fully Balanced, Blueprinted, Etc - Built by Indy Speed Shop in BC Canada known for many 1,500whp+ R35 and high boost vq37 builds. All engine work you'd expect for a high quality build like this was done.

Engine Internals
- Wiseco 9.5:1 Forged Pistons
- Carillo S Blade Connecting Rods
- ARP Head Studs
- ARP Rod Bolts
- ARP Main Studs
- OEM Main Bearings
- OEM Rod Bearings
- OEM Thrust Washers
- Cosworth Head Gaskets
- R35 GTR Iridium Spark Plugs
- Engine Bored & Honed 0.5mm
- Balanced Rotating Assembly
- JWT Exhaust Camshafts & Valve Springs

Engine Externals
- GTM GT-R Conversion lower intake manifold & GTM fuel rails
- GT-R Intake Manifold
- Injector Dynamics IDX1050 injectors (1050cc injectors)
- Aeromotive Fuel Pressure Regulator w/ boost reference (In tank FPR was deleted)
- CJ Motorsports S1.SE Fuel System Kit (Except for fuel rails, I opted for GTM fuel rails to fit the intake manifold conversion)
- 10 Micron External Aeromotive Fuel Filter
- -6 AN fuel lines
- CJM Billet Fuel Pump Hait
- Wahlbro 485 (450 LPH) Fuel Pump
- Low Mount Turbo Manifolds
- Precision 4831B Turbos for twin turbo setup (T3 .48a/r)
- Turbosmart Raceport Blowoff Valves
- Turbosmart Ultragate 38mm Wastagates (10psi spring)
- 25" x 6" x 3.5" Intercooler & 2.5" Intercooler Piping
- Setrab 34 Row Oil Cooler
- Turbowerx turbo oil Scavenge Pump w/ Custom Fabricated Collector
- Omni Power 4 Bar Map Sensor
- Factory Radiator
- Rampage Fabrication Oil Catch Can
- Agency Power Exhaust (2.5" True Dual setup, both exhaust banks have their own pipe all the way back to the mufflers and never crossover)
- AEM Boost Control Solenoid

Transmission
- 370z 6-Speed Manual Transmission
- ZSpeed Heavy Duty Concentric Slave Cylinder
- ZSpeed Stage 4 Track Clutch (Rated to 700tq)
- ZSpeed 17lb Flywheel

Rear End
- Z1Motorsports Semi-Sold Diff Bushings (Helps prevent wheel hop when doing pulls)

Wheels / Tires
Factory Nismo rays wheels
Michelin P4S 305/30/19 rear tires and 265/35/19 front tires - brand new.
Attached Images
File Type: jpg 00D0D_idRFiNn5ptl_1200x900.jpg (103.1 KB, 899 views)
File Type: jpg 00H0H_c5gBX3gpPW1_1200x900.jpg (52.8 KB, 453 views)
File Type: jpg 00e0e_kOM1AQIG9Fp_600x450.jpg (29.1 KB, 786 views)
File Type: jpg 01717_kfw0LDf2ZNP_600x450.jpg (35.5 KB, 678 views)

Last edited by braydo25; 05-04-2019 at 06:35 PM.
braydo25 is offline   Reply With Quote