Quote:
Originally Posted by mlsully
I did this on my 2015 last year. You will need the switch (I used the one from a G35). The wire you tap into is in the BCM behind the passenger kick panel. Its a gray wire, bottom corner of 40 pin the harness. If I remember correctly the pin number is 36. This is a negative pulse system, so tap into that wire and the other wire for the switch goes directly to ground.
|
Thanks for the info.
I bought
this switch from Ebay. Cheapest I could find even with UK postage.
Sully,
I guess its a momentary switch and I use two of the four terminals?
Did you buy a connector for the switch or solder the wires?
Do you reckon the BCM will still be on the passenger side on a RHD car?