View Single Post
Old 08-24-2018, 04:02 PM   #1 (permalink)
Rusty
Ronin Samurai - Assassin
 
Rusty's Avatar
 
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 35,217
Drives: 2011 Nismo GM 6M
Rep Power: 2684438
Rusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond repute
Talking Observed Oil Pressure with a gauge

As the title says. There has been a lot of talk on oil pressure lately. So the more info we can get. The better informed we will be. So post up. The more info, the better.

Gauge - SpeedHut 0 to 150 psi.
Sensor location - Tee'd with the factory sensor. Different location will give different reading.
Oil - Mobil 1 0w40. Different weight oil may give a different reading.
Oil Cooler - Z1 34 row.
Oil Temp when warm - 180F.
Engine temp when warm - 185F.

These are are the oil pressures at different rpms that I observed. Using 3rd gear. Giving the throttle just enough to get to the rpm and hold it there for about one minute.

Cold Start - 65F outside temp. 104 psi dropping to 48 psi after about 3 minutes
Cold Start - 82F outside temp. 93psi dropping to 48 psi after about 3 minutes.
Warm Idle - 38 psi
2,000 rpm - 75 psi
3,000 rpm - 87 psi
4,000 rpm - 93 psi
5,000 rpm - Goes to 102 psi then drops to 93 psi
6,000 rpm - Goes to 104 psi then drops to 93 psi
7,000 rpm - Goes to 105 psi then drops to 93 psi
7,500 rpm - Goes to 105 psi then drops to 92 psi
__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

Last edited by Rusty; 08-24-2018 at 04:08 PM.
Rusty is offline   Reply With Quote