Nissan 370Z Forum - View Single Post

cgr406 · 08-06-2018, 09:46 PM

For those of you who are remote tuned w/ ecutek AND have an aftermarket wideband AFR sensor / gauge... did you datalog from the aftermarket wideband?? If I'm understanding the ecutek instructions correctly, you can choose to log values flowing from the OBDII port. But, how do you datalog from the aftermarket WB (since it's signals are independent of the ECU / OBDII port)? Or is that not necessary? Or is there some interface that allows the aftermarket WB signal to be integrated into the values accessible via the OBDII port. Just trying to figure this out. Any help would be appreciated.

08-06-2018, 09:46 PM	#1 (permalink)
cgr406 Base Member Join Date: Sep 2013 Location: pittsburgh Posts: 106 Drives: '14 Z Sport Tour 6M Rep Power: 3367	Ecutek Datalog question For those of you who are remote tuned w/ ecutek AND have an aftermarket wideband AFR sensor / gauge... did you datalog from the aftermarket wideband?? If I'm understanding the ecutek instructions correctly, you can choose to log values flowing from the OBDII port. But, how do you datalog from the aftermarket WB (since it's signals are independent of the ECU / OBDII port)? Or is that not necessary? Or is there some interface that allows the aftermarket WB signal to be integrated into the values accessible via the OBDII port. Just trying to figure this out. Any help would be appreciated. __________________ TopGunZ Rotrex SC / CJM RFS / 1300 / Ecutek / Dynosty / F.I. TP & CBE / Z1 / Swift / SPL / Whiteline / Hotchkis / Michelin SP4