the noise is from the two panels rubbing together at the seam.
lube in the form of some wax will work but it might wear off.
one thing to try is to tighten the screw that presses the bumper against the quarter panel. should be at the edge of the wheel wheel under the liner. if its tight enough, it should prevent the bumper from moving against the qp. careful not to tighten too much tho.
Another solution if tightening doesn't work is to buy some 3m clearbra or xpel sheet. cut a small piece off and wedge it in the seam with some soapy water. once it dries, it should stay put. the material in between should prevent the squeaking noise.
hope you sort it out!
|