Nissan 370Z Forum - View Single Post

Mn23 · 06-19-2018, 08:21 AM

Thanks guys, my pedal never went to floor or soft that’s why I thought it wasn’t fading. The pedal did go stiff (but not solid hard i guess) and ABS pulsing for sure when I brake harder before the turns. I have checked no boiling fluids (RBF660), sometimes a bit smokes from the front brakes.
Maybe like you said improper bed in? I don’t have any brake noise thus I thought it was properly bedded in lol.
Brakes did come back fine after cooling down for a lap or two but happens again during harder braking after 3-4 laps.
It is a smaller 1.5km track with heavier braking and a bit bumpy.

Btw weather wasn’t hot and my friends Nismo had no problems even with his OE pads. Definitely something wrong with my setup. Did bleed the brakes when I install the cooling ducts and they are for track only also driving back and forth track. Will double check on the metal shims part.

Thanks

06-19-2018, 08:21 AM	#4 (permalink)
Mn23 Base Member Join Date: Jun 2016 Location: GTA Posts: 49 Drives: 17 Black 370Z Rep Power: 9	Thanks guys, my pedal never went to floor or soft that’s why I thought it wasn’t fading. The pedal did go stiff (but not solid hard i guess) and ABS pulsing for sure when I brake harder before the turns. I have checked no boiling fluids (RBF660), sometimes a bit smokes from the front brakes. Maybe like you said improper bed in? I don’t have any brake noise thus I thought it was properly bedded in lol. Brakes did come back fine after cooling down for a lap or two but happens again during harder braking after 3-4 laps. It is a smaller 1.5km track with heavier braking and a bit bumpy. Btw weather wasn’t hot and my friends Nismo had no problems even with his OE pads. Definitely something wrong with my setup. Did bleed the brakes when I install the cooling ducts and they are for track only also driving back and forth track. Will double check on the metal shims part. Thanks Last edited by Mn23; 06-19-2018 at 08:40 AM.