Quote:
Originally Posted by djtodd
That is one of the sensors on the harness that wraps all the way around the trans. Disconnect them all, along with the brackets, and you can lay the entire harness to the side.
Sent from my iPhone using Tapatalk
|
Okay, great, having some trouble getting to the one on the drivers side of the trans but high up on the trans, tried lowering it but cant get enough leverage or a tool on the bracket to disconnect the whole harness itself ....
Ive loosened the 4 smaller engine side bolts to the bell housing, is it okay to lower the trans with those loose? Im guessing the only way to get to those higher plugs is to have the trans as low as it will go by unbolting the trans crossmember...