Nissan 370Z Forum - View Single Post - Steering wheel adjustment to make it heavier.

flyfish · 06-11-2018, 01:27 AM

Sorry about the "Steeting" title. I guess the mods can't change that...

Thanks, FYI, that screw has an adjustment range, from page ST 24.

8. Adjust pinion rotating torque with the following procedure.

a. Measure pinion rotating torque within ±180° of neutral position of the rack assembly using tools. Stop the gear at the point where highest torque is read.

b. Loosen adjusting screw and re-tighten to 5.4 N·m (0.55 kg-m, 48 in-lb), and then loosen by 20 to 40°.

Assuming it was installed and setup correctly, 1/8 of a turn is 45°

06-11-2018, 01:27 AM	#3 (permalink)
flyfish Base Member Join Date: Sep 2013 Location: Morrison CO Posts: 64 Drives: '16 Sport 6m Rep Power: 12	Sorry about the "Steeting" title. I guess the mods can't change that... Thanks, FYI, that screw has an adjustment range, from page ST 24. 8. Adjust pinion rotating torque with the following procedure. a. Measure pinion rotating torque within ±180° of neutral position of the rack assembly using tools. Stop the gear at the point where highest torque is read. b. Loosen adjusting screw and re-tighten to 5.4 N·m (0.55 kg-m, 48 in-lb), and then loosen by 20 to 40°. Assuming it was installed and setup correctly, 1/8 of a turn is 45° __________________ 2016 Sport 6sp Deep Blue Pearl \|\| AAM intake \|\| FI TDX non-res CF + HF-Cats \|\| TEIN MonoSport w/EFDC-II \|\| Hotchkis sways \|\| Z1 34 row oil + ps cooler + diff cover + oil pan spacer \|\| TWM Short Shifter \|\| SPL everything \|\| MA-MS diff cooler \|\| Stillen brake duct \|\| ++