Hey all.
HELP!!!!!! (please
)
Tried wiring up 2x halo set of 90 mm and 60mm RGB halos from the retrofit source.
They are the prism profile's with the Morimoto bluetooth controller.
Been having issues with the LEDs. First off, they won't change color from amber.
Wiring the LEDs into the turn signal circuit and grounding the black wire to the chassis, i am able to have turn signal capabilities (it flashes when i turn but then I have no bluetooth control via the controller).
unwiring from the circuit board and going through just the bluetooth controller I get on/off functionality from the controller but no color change option. It does strobe though.
Any input on wiring would be very appreciated!