Quote:
Originally Posted by Spooler
I have the Z1 cover. The temp sensor is at the fitting on the bottom hose. I just have to adjust what temp the cooler comes on. No worries. I have
the same type setup on my Dually's tranny cooler. Works like a charm.
|
With the Z1 cover. You planning on using the top or bottom side port? For the drain port, you using a banjo fitting? Anything else is iffy for ground clearance if you are lowered. You have to watch out for the supply hose routing with the FI exhaust cans. The front of the cooler bracket comes rel close to the cans. I had to rout my hose to the center of the bracket to get it away from the can.