Originally Posted by AstatenateZ

Perfect so is my process going to work okay? I'm gonna measure it down to the decimel. So if 3.7 quarts comes out and I fill with 4 quarts, drive for 5 miles or so and go through all 7 gears, then drain, re-measure and fill again with same amount, all while being perfectly level. I should be good to go?

Do you (or anyone reading this) think I should use a normal hand pump with a small tube to go all the way into filler hole? Or use a chemical sprayer? I've seen most all DIY'ers on here using chemical sprayer, I feel like the nozzle would be too big for the small filler hole on trans??