Quote:
Originally Posted by Morfiy
At that moment I had about half of tank
My guess is AT, going to check the fluid level then inspect valve along with pan
|
If you are convinced it is not Fuel starve, then could be stability control.
I'm assuming VDC is OFF but if the yaw sensor is not isolated, the residual nannies are still active.
Plug the following string into Google and read what you find
site: the370z.com "diy yaw sensor"
Highly likely that cracking open the trans is taking you deep into the rabbit hole and the only thing down there is the dark.
Also are you sure you are not bouncing off the rev limiter with manual shift ??