Just replace the z1 cscek with the zspeed kit if you can. I just had a weird issue with my z1 cscek. I went to readjust it and I lost all pedal pressure (never even opened the bleeder or the hydraulic system).
I tried vac and gravity bleeding, nothing worked. I totally removed the bleeder and nothing was coming out. I had to totally remove the bleeder valve and hookup my vac bleeder straight to the threaded hole in the howe cylinder. once I started vacuuming from the bleeder hole, fluid started to flow out again.
I then tried to bleed it again with the bleeder valve attached, nothing. The bleeder valve is bad but luckily I have pedal pressure again. I also notice my little helper spring on the howe cylinder is broken.
This kit is getting replaced when I get a chance to work on the clutch.
|