Quote:
Originally Posted by SouthArk370Z
1: There's no need to remove the fuses to check them with a meter. If the circuit is unpowered
You may be right, but I doubt it. The wiring you were modifying is small enough that that wire would burn up before some of the larger wires that are involved.
*Edit: The readings may not be exactly zero but they should be very close. |
Well you were right and I'm so glad that my pessimism wasn't correct! Testing them without removing them went so much quicker so I could check them all easily. In case anyone else had a similar problem, the bad fuse was one labeled "meter".
I learned many things and had a good outcome. Thanks so much for your patience. Much appreciated!