Hi Everyone!
In the image attached, I have a Stillen Supercharger Kit installed into the vehicle as you can see.
In the photo, I have circled / highlighted / pointed out 4 different pulleys after the full install was completed.
I was wondering if anyone could be so kind and tell me the diameters of each pulley in the photo / verify my information based on my research.
Green Pulley = ???
Red Pulley = Stillen 8psi stock pulley that came with the kit = ???
Yellow Pulley = 3.2''?
Blue Pulley = 3.2"?
The reason I ask is so that I know when I change both pulleys on the Serpentine Jackshaft side, I would know what sizes to get to make up for any slack by reducing the size of one of them.
Right now, I have purchased a 3.47'' jackshaft supercharger side pulley to replace the
yellow one, and a 3.0" supercharger pulley to replace the
blue one that is right on the supercharger itself, which makes up about total of 6.47'' (Would be a bit tight because of the extra .07" added but I think I could make it fit?
But the other side for the Jackshaft serpentine side, I know that the 9 psi pulley I purchased is 2.87" which will be replacing the stock 8psi pulley (
Red one), but the
green pulley (idler pulley) next to that one...I do not know the exact size?
Can anyone help? Thanks, it would be much appreciated!
