No-Pics update... I trimmed the side and the outside shape looks fantastic.. but I didn't feel good about where I glassed it on the inside blindly.... I ended up doing what I should have done when I added that side - I cut a panel out of the bottom so it wouldn't be blind anymore.
.. It was a bit of a mess in there, so I mixed up 8oz of resin and just poured it in against that edge to ensure it was sealed up completely and the seam is strong. Added a few extra layers to that side to stiffen it up as well. Only found one pin hole large enough to leak so not too bad. Ill glass the panel back in tomorrow and take some pics... will also do the bondo Milkshake and finally start filling and cleaning up the outside for vinyl.
|