Esser

Cleaned off the fender liners and got them put back in:



Headers going in! They fit with room to spare. They are ceramic coated and look great.




Got the driveshaft installed as well:


I started doing some wiring up front. I had been putting off doing some of the tedious work of trying to hide some of the fuse boxes, and tackle the front headlight/horn harness. I was a long process getting the front section back in and hiding everything. I started with a huge mess and ended up cleaning it up quite a bit:




Tucked the front fuse box under the crash bar. I will only be using two of these relays in the end after everything is functioning:


Horns mounted:


I hid the fan relays in each fender liner. I tucked them in the little plastic crevice and ran the wires through the back with a little grommet:





I ran some 10g wire all the way to the back and hid the fuel pump relay in the compartment where the spare tools went. Should feed some power to the Walbro 400 nicely

__________________