Quote:
Originally Posted by jchammond
One thing is for sure; You should be able to get an accurate whp/tq with 4.08’s...as it won’t over speed the Dyno in 5th gear (1:1)
Your 4th is 1.27:1 & an auto is 1.41:1,
Some tuners avoid 1:1 in these cars because of the higher speed @7500+ R’s
Good Luck & post some #’s ... as 5th will yield higher ones than 4th gear,
And don’t be surprised if your #’s Dropoff a tad; because it’s easier for the engine to turn 4.08’s vs. 3.69 or 3.36’s
|
There is not much of a power difference doing a dyno in 4th or 5th gear with the 4.08 you yield just about the same numbers..
I was at 320whp with the 3.36 and with the 4.08 301whp
In the link below post 4 it has my dyno comparison. It has a fourth gear pull a fifth gear pull in the 4.08 gears compared to the fourth gear in 3.36 gears
https://www.myg37.com/forums/ecu-tun...-new-dyno.html