View Single Post
Old 10-12-2017, 12:54 PM   #22 (permalink)
markesc
Enthusiast Member
 
Join Date: Apr 2014
Location: Utah
Posts: 380
Drives: 2014 370z M.B. 7AT
Rep Power: 3366
markesc has a reputation beyond reputemarkesc has a reputation beyond reputemarkesc has a reputation beyond reputemarkesc has a reputation beyond reputemarkesc has a reputation beyond reputemarkesc has a reputation beyond reputemarkesc has a reputation beyond reputemarkesc has a reputation beyond reputemarkesc has a reputation beyond reputemarkesc has a reputation beyond reputemarkesc has a reputation beyond repute
Default

I think the main problem is this:

Most of us simply do not have long enough commutes of sustained braking use to properly heat up the pads slowly enough. So then it becomes nothing nothing nothing and then: OH! there are a few turns I'm going to hit hard, then hard braking leading to deposits over time, leading to the throbbing pedal after anywhere from 3-6 months on a stock rotor/pad combo.

I've had this happen on the last four cars I've owned. I believe there are two ways you can remedy it:

A) change your driving behavior and accept the reality of the stock pads
B) attack it through different equipment (hence the debate on which/why/how)

I'll tell you what has worked for me every single time on the last four vehicles:

Pads: Ebc Redstuff / your choice, just not stock, something that can take some heat but I wouldn't suggest track pads as they may not heat up enough on short drives.

Rotors: Some basic slotted rotors will work fine. I Had ebc's on my wrx, never had an issue with them. If you really want to go all out, I'd strongly suggest a 2-piece rotor from Z1 atleast for the fronts. If you have a choice, a "sprinkle slotted" rotor design from my experience makes less noise than a fully slotted setup. The EBC's did make a ton of noise on my wrx, but I never had the pad deposit issue show up again. I did have some genuine brembo drilled rotors on the wrx, never had an issue with them, but they were not cheap, and last time i checked they don't make them for the 370.

I've read in other places that you can stick with stock rotors and simply go with a different pad, which I've never actually tried, but it sounds like that may be the cheapest solution, but it would really suck if you picked the wrong pad that left deposits, leading to doing it all over again... So I'd ask more on pad choices vs. commute/use.

Def get your hands on some Motul 600 fluid and flush them out really well!

I can say confidently I love my 2 piece Z1's front/rear combo with ebc redstuffs, motul 600, and SS Lines, but it wasn't cheap, and I don't actually push them often enough to warrant it, but I get back time NOT at the stupid dealership which is $$$. The few times I do push it, It's one less thing I have to think about while tackling a set of corners, now I'm staring at the oil temp gauge and wishing I had a front sway bar and "how much more $ is a Porsche cayman s?"
markesc is offline   Reply With Quote