View Single Post
Old 10-09-2017, 02:49 PM   #1972 (permalink)
perez519
Base Member
 
perez519's Avatar
 
Join Date: Jul 2014
Location: canada
Posts: 7
Drives: G37 IPL
Rep Power: 11
perez519 is on a distinguished road
Default

Quote:
Originally Posted by TBatt View Post
It looks like you are running the stock Stillen system. That is where your problem is, you need the A2A kit.

What pulley did you install for the 9psi upgrade, the Stillen or the Vortech?

The Stillen pulley mounts on the engine driven jackshaft and my kit will prevent slip on that side but the SC drive belt may be the problem.

By using my kit on the serpentine drive belt and using the Vortech 2A038-295 pulley and replacing the SC idler pulley with a Gates #36225 you should not get any belt slip.


I'm running stillen 9psi pulley they provided 2 years ago. Yes that will be the next step now is to get Topgunz A2A kit. At same time I will probably replace the impeller and bearings while I'm at it.

So do I need to replace my idler pulley on the SC side?


Sent from my iPhone using Tapatalk
perez519 is offline   Reply With Quote