Fiberglass is nasty, but really DIY friendly and can easily learned at the University of Youtube =)
I'd start with some heavier chop mat like 3oz that you can cut and lay in larger flatter areas, and then some 1.5oz mat to tear up and use in curves/corners. Get enough mat for 3 layers of 3oz in the larger areas. At that point it should be strong enough that you can easily add more layers outside the car if you need to. If you pick up supplies at fgci locally, the folks at the store will help you select the proper amount of resin to go with it... they are pretty knowledgeable there and I have even spoke to guys there that have experience building enclosures. Don't forget the respirator!!!!!
|