In the pics I'm pointing out the location (first pic) and the top of the bungee loop (2nd and 4th pics) from both sides of the car. In pics 2 and 4 it's hard to make out but my finger is on the top fabric loop the bungee is threaded through. That loop is where I pulled the bungee forward, tightening the back side and loosening the front of the bungee.
So far it's still has not hit again, however I've noticed its getting closer to hitting. Right after I had made my "adjustment" the tonneau cleared the bar (in pic 3, you can clearly see the scratch) by an inch now it just about is hitting again. On mine it's been only hitting on the drivers side, but I adjusted the bungees on both sides.
|