Quote:
Originally Posted by Rusty
I just finger tight first. Then used a 3/8" ratchet and started tighten them up. Did it in 3 steps.
|
I thought there was a recommended sequence for torquing them down. The OP stated it in his original DIY post.
__________________
~Rob 
-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...
|